Tuner Mode; Selecting The Tuner Input Source; Selecting Presets In Steps; Selecting Presets Directly - Grundig UMS 4700 SPCD Manual

4 98.50
MHz
8 100.60
MHz
VILRADIO ST.
RDS
MHz

TUNER MODE

Selecting the tuner input source

1 Select the TUNER input source with
hi-fi system or »FUNCTION« on the remote control.
– Display: »
– The most recently selected station is played (Last Station
Memory).
– Display: the preset, the frequency and the station name.

Selecting presets in steps

1 Press »PRESET
– Display: for example, »
name.

Selecting presets directly

1 Select presets 1 to 9 with the number keys »1« to »9« directly on
the remote control.
– Display: for example, »
name.
2 Select presets 10 to 15 by first entering the tens with the number
key »+10« and then the units with »0« to »5«.
– Display: for example, »
name.

Stereo/mono reception

If the hi-fi system is receiving a stereo broadcast, »
display. If the signal from the stereo channel is weak, you can
improve the sound quality by switching to mono reception.
1 Press »RAND.
reception.
– Display: »
2 To switch back to stereo, press
control.
– Display: »
------------------------------------------------------------------------------------
TUNER
« and the frequency.
« to move up and down presets one at a time.
7
2
« with the frequency or the station
8
« with the frequency or the station
14
« with the frequency or the station
)
« on the remote control to switch to mono
ST.
« disappears.
ST.
«.
»TUNER BAND« on the
ST.
« appears in the
)
»RAND. « on the remote
19