Information; Setting The Infrared Code Of The Remote Control To The Television - Grundig RCD 8300 Operating Manual

INSTALLATION
PR1
CHANGE CODE
EXTENDED
56

INFORMATION

Setting the infrared code of the remote control to
the television
Because you can also use the HiFi remote control to operate the television, it is
important to adapt the infrared code to the television you are operating.
The basic setting is the standard code, which is used, for example, for all
FineArts Vision televisions manufactured from 1999 to 2001. For FineArts Vision
televisions with Digi 100, and for other Digi 100 televisions, the infrared code
must be adjusted.
1
Call up the »AUDIO« menu by pressing »Audio« on the remote control.
– Display: the »AUDIO« menu.
2 In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »SETUP« menu.

3 In the »SETUP« menu, press » INSTALLATION«.
– Display: the »INSTALLATION« menu.

4
In the »INSTALLATION« menu, press » P R 1 «.
– Display: the »PR1« menu.
5
In the »PR1« menu, press » CHANGE CODE«.

– Display: the »CHANGE CODE« menu.
6
In the »CHANGE CODE« menu, press » EXTENDED«.
– The »EXTENDED« button appears inverted.

– The remote control is set for Digi 100 operation.
7 Press »
_____________________________________________________________
« (several times) to return to the Audio menu.