Checking The Identification Number Of The Remote Control - Grundig RCD 8300 Operating Manual


SETUP M-ROOM
INSTALLATION
PR1
PR1 ID
40
MULTI-ROOM MODE
9 To install more remote controls, repeat steps
10
Press »
Checking the identification number of the remote
control
You need the identification number to delete one of a number of remote con-
trols. If you want to delete a remote control, you must know your identification
number (see next section). We recommend that you make a note of the identifi-
cation number on the inside of the battery compartment cover.
1
Call up the »AUDIO« menu by pressing »Audio« on the remote control.
– Display: the »AUDIO« menu.

2
In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »SETUP« menu.

3
In the »SETUP« menu, press » INSTALLATION«.
– Display: the »INSTALLATION« menu.
4 In the »INSTALLATION« menu, press » P R 1 «.

– Display: the »PR1« menu.
5 In the »PR1« menu, press » PR1 ID«.

– Display: the » PR1 ID« menu with the identification number.
________________________________________________________________
« (several times) to return to the »AUDIO« menu.
to 8.
2