Resetting The Hifi System - Grundig RCD 8300 Operating Manual

Fine arts audion wireless hifi system
Hide thumbs Also See for RCD 8300:
Table of Contents

Advertisement

SOURCE
50/60Hz
58
INFORMATION

Resetting the HiFi system

1
Switch off the HiFi system by pressing the mains switch on the back of the
HiFi.
2
Press »SOURCE« on the HiFi and keep it pressed while you switch on the
HiFi with the mains switch on the back of the HiFi.
– Display: »ATTENTION: "SOURCE" RESETS THE HIFI SYSTEM«.
Press »SOURCE« to confirm this.
3
– Display: after 2 to 3 seconds, »COMPLETED. HIFI SYSTEM NOW IN DELI-
VERY STATUS«.
4
Switch off the HiFi system by pressing the mains switch on the back of the
HiFi.
Resetting the active loudspeakers
1
Switch on the loudspeakers with the mains switch on the back of the speaker,
at the bottom (LSP2), or on the top of the speaker (LSP3).
2
Press »RESET« on the bottom (LSP2) or back (LSP3) of the speaker for
longer than 10 seconds, using an implement such as a thin pencil.
– The operation indicator on the speaker flashes green/red.
3
Switch off the loudspeaker with its mains switch.
__________________________________________________________________________

Advertisement

Table of Contents
loading

Table of Contents