Setting Up Different Input Sources For Individual Rooms - Grundig RCD 8300 Operating Manual



50
MULTIPLE ROOM OPERATION

Setting up different input sources for individual rooms

You can listen to up to two input sources in a number of rooms at the same time.
If you also try to set a third input source, the following message appears in the
remote control display: »

1
Call up the »
– Display: the »
2
In the »
2
– Display: the »

3
In the »

»
– The input source selected becomes active in room 5.

– Display: the input source selected (»
room is switched off.

4 To set the input source in other rooms, repeat step 3.

Note:
You can also access the »
You can only switch between »
two input sources are active in other rooms.
« menu by pressing »Audio« on the remote control.
« menu.
« menu, press »
« menu.
« menu, for example, use »
«, » «, » « and »
________________________________________________
«
«.
« to switch between
«.
«, » «, »
« menu via the relevant input source.
« and the input source already active if
«) or » « if the