Deleting A Pair Of Loudspeakers (Room 1) - Grundig RCD 8300 Operating Manual

LSP
DELETE LSP
34
SECOND PAIR OF SPEAKERS
10 Turn on the left loudspeaker with the mains switch.
– The operation indicator of the loudspeaker first flashes orange, then
green. The left loudspeaker has been detected.
– Display: »SWITCH ON THE RIGHT SPEAKER«.
11
Turn on the right loudspeaker with the mains switch.
– The operation indicator of the loudspeaker first flashes orange, then the
indicators of both loudspeakers light up green. The right loudspeaker has
been detected.
– Display:
ROOM COMPLETED«.

Deleting a pair of loudspeakers (room 1)

The HiFi system must be switched on for the data transmission to be carried out.
At least one pair of speakers must always be installed on the HiFi system.
1 Call up the »AUDIO« menu by pressing »Audio« on the remote control.
– Display: the »AUDIO« menu.
2
In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »SETUP« menu.
3
In the »SETUP« menu, press »INSTALLATION«.
– Display: the »INSTALLATION« menu.

4
In the »INSTALLATION« menu, press »LSP«.
– Display: the »LSP« menu.

5
In the »LSP« menu, press »DELETE LSP«.
– Display: the »DELETE LSP« menu.
__________________________________________________
briefly, »INSTALLATION OF SPEAKERS IN CURRENT