Checking Eyecan Drivers - Intel Mobileye EyeCAN Kit User Manual

7.1.3 Checking EyeCAN Drivers

Check if the EyeCAN Drivers are installed correctly by performing the following:
a. Connect EyeCAN USB connector to computer
b. Right Click on "My Computer" and go to > Manage > Device Manager >
Universal Serial Bus controllers >
c. Check the following is installed correctly: "USB Bulk driver" (see figure)
Figure 11: Checking EyeCAN Drivers in Windows Device Manager
7.1.4 Checking EyeCAN Drivers
The EyeCAN Drivers are installed automatically with the installation of the Mobileye Setup Wizard. If the
EyeCAN Drivers were not installed during the Mobileye Setup Wizard installation or require a new installation
perform the following:
a. Download the EyeCAN from the Mobileye Ftp.
b. Run the EyeCAN Driver installation
c. When the Driver installation is complete connect the EyeCAN cable to computer
d. Perform checks as mentioned in the sections above
Mobileye EyeCAN Kit
User Guide
v3.1
10