Poe Profile Configuration; Introduction To Poe Profile - H3C S5100-SI Operation Manual

2

PoE Profile Configuration

Introduction to PoE Profile

On a large-sized network or a network with mobile users, to help network administrators to monitor the
PoE features of the switch, S5100-SI/EI series Ethernet switches provide the PoE profile features. A
PoE profile is a set of PoE configurations, including multiple PoE features.
Features of PoE profile:
Various PoE profiles can be created. PoE policy configurations applicable to different user groups
are stored in the corresponding PoE profiles. These PoE profiles can be applied to the ports used
by the corresponding user groups.
When users connect a PD to a PoE-profile-enabled port, the PoE configurations in the PoE profile
will be enabled on the port.
PoE Profile Configuration
Configuring PoE Profile
Table 2-1 Configure PoE profile
Enter system view
Create a PoE profile and enter PoE profile
view
Configure the
relevant
features in PoE
profile
Quit system view
Apply the
existing PoE
profile to the
specified
Ethernet port
Operation
Enable the PoE feature
on a port
Configure PoE mode for
Ethernet ports
Configure the PoE priority
for Ethernet ports
Configure the maximum
power for Ethernet ports
In system view
Command
system-view
poe-profile
profilename
poe enable
poe mode { signal |
spare }
poe priority { critical |
high | low }
poe max-power
max-power
quit
apply poe-profile
profile-name interface
interface-type
interface-number [ to
interface-type
interface-number ]
2-1
Description
—
Required
If the PoE file is created,
you will enter PoE profile
view directly through the
command.
Required
Disabled by default.
Optional
signal by default.
Optional
low by default.
Optional
15,400 mW by default.
—
Use either approach.