Configuring A Static Router Port; Configuring A Port As A Simulated Group Member - H3C S5100-SI Operation Manual

Ethernet switches
Hide thumbs Also See for H3C S5100-SI:
Table of Contents

Advertisement

Operation
Enter VLAN interface view
Configure specified port(s) as
static member port(s) of a
multicast group in the VLAN

Configuring a Static Router Port

In a network where the topology is unlikely to change, you can configure a port on the switch as a static
router port, so that the switch has a static connection to a multicast router and receives IGMP messages
from that router.
In Ethernet port view
Table 2-15 Configure a static router port in Ethernet port view
Operation
Enter system view
Enter Ethernet port view
Configure the current port as a
static router port
In VLAN view
Table 2-16 Configure a static router port in VLAN view
Operation
Enter system view
Enter VLAN view
Configure a specified port as a
static router port

Configuring a Port as a Simulated Group Member

Generally, hosts running IGMP respond to the IGMP query messages of the multicast switch. If hosts
fail to respond for some reason, the multicast switch may consider that there is no member of the
multicast group on the local subnet and remove the corresponding path.
To avoid this from happening, you can configure a port of the VLAN of the switch as a multicast group
member. When the port receives IGMP query messages, the multicast switch will respond. As a result,
the port of the VLAN can continue to receive multicast traffic.
Through this configuration, the following functions can be implemented:
Command
interface vlan-interface
interface-number
multicast static-group
group-address interface
interface-list
Command
system-view
interface interface-type
interface-number
multicast static-router-port
vlan vlan-id
Command
system-view
vlan vlan-id
multicast static-router-port
interface-type interface-number
2-11
Remarks
Required
By default, no port is configured
as a static multicast group
member port.
Remarks
Required
By default, no static router port
is configured.
Remarks
Required
By default, no static router port
is configured.

Advertisement

Table of Contents
loading

This manual is also suitable for:

H3c s5100-ei

Table of Contents