Static Router Port Configuration - H3C S5500-SI Series Manual

Operation Manual – Multicast Protocol
H3C S5500-SI Series Ethernet Switches
MAC group(s):
MAC group address:0100-5e01-0101
As shown above, GigabitEthernet 1/0/3 and GigabitEthernet 1/0/4 of Switch A have
joined multicast source/group (1.1.1.1, 224.1.1.1).

1.8.2 Static Router Port Configuration

I. Network requirements
No multicast protocol is running on Router B. After the configuration, Switch A should
be able to forward multicast data to Router B. Figure 1-4 shows the routernetwork
connections.
II. Network diagram
1.1.1.1/24
Source
Figure 1-4 Network diagram for static router port configuration
III. Configuration procedure
1) Configuring a VLAN
# Create VLAN 100.
<SwitchA> system-view
[SwitchA] vlan 100
# Add ports GigabitEthernet1/0/1 through GigabitEthernet1/0/4 into VLAN 100.
GigabitEthernet 1/0/3
GigabitEthernet 1/0/4
Host port(s):total 2 port.
GigabitEthernet 1/0/3
GigabitEthernet 1/0/4
RouterB
GE 1/0 /1
RouterA
Multicast Packets
Chapter 1 IGMP Snooping Configuration
GE1 /0/4
Switc hA
GE 1/ 0/3
GE 1/0 /2
HostA
1-23
(D) ( 00:03:23 )
(D) ( 00:03:23 )
Internet
Receiver
HostB