Scanning Large Documents With Flatbed [Fi-6240 Only - Fujitsu fi-6140 Operator's Manual

3.3 Scanning Large Documents with Flatbed [fi-6240 only]

fi-6140 / fi-6240 Image Scanner Operator's Guide
3.3 Scanning Large Documents with Flatbed [fi-6240 only]
1. Open the document cover.
2. Remove the document cover as shown in the figure below.
3. Load the document on the document bed face down.
4. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] → [Fujitsu ScandAll PRO] → [Fujitsu ScandAll PRO] in the order
presented. Then, ScandAll PRO starts up.
5. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the scanner driver's setup dialog box, see Section
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/03/c03_03_01.htm (1/2) [2008/10/30 12:41:53]
TROUBLESHOOTING
CONTENTS MAP
TOP
"2.6 How to Use ScandAll PRO."