Cleaning Materials And Locations That Require Cleaning; Location And Frequency - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 6 Daily Care

6.1 Cleaning Materials and Locations that Require Cleaning

Cleaning Materials
Name Part No.
Cleaner F1 PA03950-
0352
Cleaning Paper CA99501-
0012
Cleaning Wipe PA03950-
0419
Cotton swab Commercially available
Dry cloth
In order to use the cleaning materials safely and correctly, read
the precautions on each product thoroughly.
For more information about the cleaning materials, contact
your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
Notes
100 ml
Moisten a cloth or Cleaning
Paper with this liquid to wipe the
scanner clean.
It may take a long time to dry if
an excessive amount is used.
Use it in small quantity. Wipe off
the cleaner completely to leave
no residue on the cleaned parts.
10 sheets
Use this non-woven sheet with
Cleaner F1.
24 packets
Pre-moistened with Cleaner F1.
It can be used instead of
moistening a cloth with Cleaner
F1.

Location and Frequency

Location
ADF Brake roller
Pick roller
Idler roller
Glass
Ultrasonic sensor
Feed roller
Eject roller
Flatbed Document pad
(fi-6230Z/
Document bed
fi-6240Z)
Plastic frame
Cleaning cycles may vary depending on the condition of the
documents. Also, cleaning must be performed more frequently
when the following types of documents are scanned:
Smooth-faced documents such as coated paper
Documents with printed text/graphics that almost cover the
entire surface
Chemically-treated documents such as carbonless paper
Documents containing a large amount of calcium carbonate
Documents written in lead pencil
Documents on which the toner is not sufficiently fused
Frequency
Every 5,000 sheets
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
109