Client Bridge + Ap Mode; Wisp (Cpe) + Ap Mode - TRENDnet TEW-740APBO User Manual

TEW-740APBO / TEW-740APBO2K
TRENDnet User's Guide

Client Bridge + AP Mode

It can be used as an Client Bridge + AP to receive wireless signal over last mile applications, helping WISPs deliver wireless broadband Internet service to new residential and business
customers. In this mode, the access point is enabled with DHCP Server functions. In this mode, the AP functions similar to that of a wireless client or station such as mobile phone, tablet,
or notebook computer, however is also capable of broadcasting wireless signal for other wireless clients to connect. The wired ports LAN1 (PoE) and LAN2 are logically bridged to the
wireless interface. The wired clients of access point are in the same subnet from Main Base Station and it accepts wireless connections from client devices.

WISP (CPE) + AP Mode

It can be used as an Outdoor Customer Premised Equipment (CPE) to receive wireless signal over the last mile, helping WISPs deliver wireless broadband Internet service to new
residential and business customers. This In this mode, the access point wireless interface connects to the wireless Internet service provider (WISP) and acts as the Internet or WAN
Interface. The wired interfaces LAN1 (PoE) and LAN2 operate as the LAN local interface with NAT and DHCP Server functions and wireless interface operates as the WAN Internet interface.
© Copyright 2017 TRENDnet. All Rights Reserved.
26