Field
Address/Mask
Version
MetricIn
MetricIn route policy
MetricOut
MetricOut route policy
Split-horizon
Poison-reverse
Input/Output
Default route
Current packets number/Maximum packets number
display rip route
Syntax
display rip process-id route [ ip-address { mask | mask-length } | peer ip-address | statistics ] [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
Description
IP address and mask of the interface.
RIP version running on the interface.
Additional routing metric added to the incoming
routes.
Name of the routing policy used to add the additional
routing metric for the incoming routes. If no routing
policy is referenced, the field displays Not
designated.
Additional routing metric added to the outgoing
routes.
Name of the routing policy used to add the additional
routing metric for the outgoing routes. If no routing
policy is referenced, the field displays Not
designated.
Indicates whether split-horizon is enabled:
•
on—Enabled.
•
off—Disabled.
Indicates whether poison-reverse is enabled:
•
on—Enabled.
•
off—Disabled.
Indicates if the interface is allowed to receive (Input) or
send (Output) RIP messages:
•
on—Means it is allowed.
•
off—Means it is not allowed.
Indicates whether sending the default route to RIP
neighbors is allowed:
•
on—Means it is allowed.
•
off—Means it is not allowed.
Packets to be sent/Maximum packets that can be sent
on the interface.
34