Lexmark MX310dn User Manual page 144

Understanding the printer menus
Use
PCL Emulation Settings
Pitch
0.08–100.00
PCL Emulation Settings
Orientation
Portrait
Landscape
PCL Emulation Settings
Lines per Page
1–255
PCL Emulation Settings
A4 Width
198 mm
203 mm
PCL Emulation Settings
Auto CR after LF
On
Off
PCL Emulation Settings
Auto LF after CR
On
Off
To
Specify the font pitch for scalable monospaced fonts.
Notes:
•
10 is the factory default setting.
•
Pitch refers to the number of fixed‑space characters per inch (cpi). This
can be increased or decreased in 0.01‑cpi increments.
•
For non‑scalable monospaced fonts, the pitch appears on the display but
cannot be changed.
Specify the orientation of text and graphics on a page.
Notes:
•
Portrait is the factory default setting. It prints text and graphics parallel to
the short edge of the page.
•
Landscape prints text and graphics parallel to the long edge of the page.
Specify the number of lines that print on each page.
Notes:
•
60 is the U.S. factory default setting. 64 is the international default
setting.
•
The printer sets the amount of space between each line based on the
Lines per Page, Paper Size, and Orientation settings. Select the paper size
and orientation before setting Lines per Page.
Set the printer to print on A4‑size paper.
Notes:
•
198 mm is the factory default setting.
•
The 203‑mm setting sets the width of the page to allow the printing of
eighty 10‑pitch characters.
Specify whether the printer automatically performs a carriage return (CR) after
a line feed (LF) control command.
Note: Off is the factory default setting.
Specify whether the printer automatically performs a line feed (LF) after a
carriage return (CR) control command.
Note: Off is the factory default setting.
144