Lexmark MX310dn User Manual page 121

Understanding the printer menus
Use
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
On
Press Sleep Button
Do nothing
Sleep
Hibernate
Press and Hold Sleep Button
Do nothing
Sleep
Hibernate
Factory Defaults
Do Not Restore
Restore Now
Custom Home Message
Off
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text [x]
To
Set the printer to automatically check for jammed paper.
Note: On is the factory default setting.
Let the printer successfully print a page that may not have printed
otherwise.
Notes:
•
Off is the factory default setting. This prints a partial page
when there is not enough memory to print the whole page.
•
On sets the printer to process the whole page so that the
entire page prints.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Determine how the printer, while in idle state, reacts to a long press
of the Sleep button.
Note: "Do nothing" is the factory default setting.
Return the printer settings to the factory default settings.
Notes:
•
Do Not Restore is the factory default setting. This keeps the
user‑defined settings.
•
Restore Now returns all scanner settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in the RAM are deleted.
Create a custom home message that appears during warnings,
printer errors and the Home Prime/Status state.
Notes:
• The maximum number of characters for a custom message is
40 (NV 80 bytes). If the custom message requires more than
2 lines, then normal scrolling behavior will occur.
•
When the Home Prime/Status has a custom message and
there is a warning with custom message, the Home
Prime/Status condition is shown first.
121