Copying Photos; Copying On Specialty Media - Lexmark MX310dn User Manual

Copying
•
The ADF indicator light comes on when the paper is loaded properly.
2
Adjust the paper guides.
3
From the printer control panel, use the keypad to enter the number of copies, and then press
Copying using the scanner glass
1
Place an original document facedown on the scanner glass in the upper left corner.
2
From the printer control panel, use the keypad to enter the number of copies, and then press
Note: If you want to scan another document, then place the next document on the scanner glass, press the left
or right arrow button to scroll to Scan the Next Page, and then press
3
Press the left or right arrow button to scroll to Finish the Job, and then press

Copying photos

1
Place a photo facedown on the scanner glass in the upper left corner.
2
From the printer control panel, navigate to:
> Copy > > Content Type > Photo
3
From the Content Source menu, choose a setting that best describes the original photo your are copying, and then
press .
Note: If you want to copy another photo, then place it on the scanner glass, press the left or right arrow button
to scroll to Scan the Next Page, and then press
4
Press the left or right arrow button to scroll to Finish the Job, and then press

Copying on specialty media

Copying on transparencies
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
.
.
58
.
.
.
.