Using The Adf And Scanner Glass - Lexmark MX310dn User Manual

Learning about the printer

Using the ADF and scanner glass

Automatic document feeder (ADF)
Use the ADF for multiple‑page documents.
Note: The ADF scans only one side of the page.
Using the ADF
•
Load the document into the ADF tray faceup, short edge first.
• Load up to 50 sheets of plain paper into the ADF tray.
• Scan sizes from 105 x 148 mm (4.1 x 5.8 inches) wide to 216 x 368 mm (8.5 x 14.5 inches) long.
•
Scan media weights from 52 to 120 g/m
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
Using the scanner glass
When using the scanner glass:
•
Place the document facedown on the scanner glass in the corner with the green arrow.
•
Scan or copy documents up to 216 x 296.9 mm (8.5 x 11.69 inches).
•
Copy books up to 12.7 mm (0.5 inch) thick.
Scanner glass
Use the scanner glass for single‑page documents, book pages, small items
(such as postcards or photos), transparencies, photo paper, or thin media
(such as magazine clippings).
2
(14–32 lb).
12