Solving Fax Problems - Lexmark MX310dn User Manual

Troubleshooting
Action
Step 2
Check if the paper size setting matches the size of the paper loaded in the
tray.
From the Paper menu on the printer control panel, check the Paper
Size setting.
Does the paper size setting match the size of the paper loaded in the tray.
Step 3
a
Specify the paper size. Depending on your operating system, specify
the paper size in Printing Preferences or the Print dialog.
b
Resend the print job.
Do copies print properly?

Solving fax problems

•
"Fax function is not set up" on page 230
•
"Caller ID is not shown" on page 231
• "Cannot send or receive a fax" on page 232
•
"Can send but not receive faxes" on page 234
•
"Can receive but not send faxes" on page 235
•
"Received fax has poor print quality" on page 236
Fax function is not set up
Before completing these instructions for network printers, check if the fax cables are connected.
Note: The indicator light blinks red until you set up fax.
Yes No
Go to step 3. Change the paper size
setting to match the
paper loaded in the
tray, or load the tray
with paper that
matches the paper size
setting.
The problem is solved. Contact
support.
230
customer