Copying On Letterhead - Lexmark MX310dn User Manual

Copying
3
From the printer control panel, navigate to:
> Copy > > Copy from > select the size of the original document
4
Navigate to:
Copy to > > select the tray containing the transparencies >
number on the keypad >
5
If there are no trays that contain transparencies, then do the following:
a
Navigate to:
Copy to > > Manual Feeder >
b
Load transparencies into the multipurpose feeder, and then press
Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow
button to scroll to Scan the Next Page, and then press
6
Press the left or right arrow button to scroll to Finish the Job, and then press

Copying on letterhead

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
> Copy > > Copy from > select the size of the original document
4
Navigate to:
Copy to > > select the tray containing the letterhead >
on the keypad >
5
If there are no trays that contain letterhead, then do the following:
a
Navigate to:
Copy to > > Manual Feeder >
b
Place the letterhead faceup, top edge first into the multipurpose feeder, and then press
> select the size of the transparencies >
.
> select the number of copies or enter a number
> select the size of the letterhead > Letterhead
> select the number of copies or enter a
> Transparency >
.
.
59
.