Storing Supplies - Lexmark MX310dn User Manual

Maintaining the printer
Item
Worldwide
High Yield Toner Cartridge
Ordering a maintenance kit
Notes:
•
Using certain types of paper may require more frequent replacement of the maintenance kit.
•
The separator roller, fuser, pick rollers, transfer roller, and redrive assembly are all included in the maintenance
kit and can be individually ordered and replaced if necessary.
•
Contact your service representative to replace the maintenance kit.
Maintenance kit
*
100‑V maintenance kit
110‑V maintenance kit
220‑V maintenance kit
* This is available only in Japan.
Ordering an ADF separator pad
Order an ADF separator pad when the ADF fails to pick paper or picks more than one sheet of paper at a time.
For information on replacing the ADF separator pad, see the instruction sheet that came with the part.
Part name
Separator pad
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of
toner from toner cartridge.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name
Imaging unit

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you
are ready to use them.
Do not expose supplies to:
•
Direct sunlight
• Temperatures above 35°C (95°F)
Lexmark Return Program
500Z
Regular cartridge
600HA
Part number
40X9146
40X9135
40X9136
Part number
40X6247
Regular
500ZA
161