Copying; Making Copies - Lexmark MX310dn User Manual

Copying

Copying
Automatic document feeder (ADF)
Use the ADF for multiple‑page documents including
two-sided (duplex) pages.

Making copies

Making a quick copy
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure the size of the original document and the size of the copy paper are
the same.
3
From the printer control panel, press
Copying using the ADF
1
Load an original document faceup, short edge first into the ADF tray.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
Scanner glass
Use the scanner glass for single-page documents, book pages, small
items (such as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
.
57