Copying
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
> Copy >
> Collate > select the collate setting you want > select the number of copies or enter a number
on the keypad >
Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow
button to scroll to Scan the Next Page, and then press
4
Press the left or right arrow button to scroll to Finish the Job, and then press
Placing separator sheets between copies
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
> Copy >
> Separator Sheets
4
Select Between Copies, Between Jobs, Between Pages, or Off.
5
Select the number of copies or enter a number on the keypad, and then press
Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow
button to scroll to Scan the Next Page, and then press
6
Press the left or right arrow button to scroll to Finish the Job, and then press
Copying multiple pages onto a single sheet
To save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of
paper.
Notes:
•
Make sure the paper size is set to letter, legal, A4, or JIS B5.
•
The copy size must be set to 100%.
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
.
.
.
.
.
64