Lexmark MX310dn User Manual page 128

Understanding the printer menus
Use
Behind a PABX
Yes
No
Enable ECM
Yes
No
Enable Fax Scans
On
Off
Driver to fax
Yes
No
Allow Save as Shortcut
On
Off
Dial Mode
Tone
Pulse
Max Speed
2400
4800
9600
14400
33600
Background Removal
‑4 to 4
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
0–5
Best for content
To
Enable or disable switchboard blind dialing without a dial tone.
Note: No is the factory default setting.
Enable or disable Error Correction Mode for fax jobs.
Note: Yes is the factory default setting.
Fax files that are scanned at the printer.
Note: On is the factory default setting.
Allow the printer driver to send fax jobs.
Note: Yes is the factory default setting.
Save fax numbers as shortcuts in the printer.
Note: On is the factory default setting.
Specify the dialing sound, either as a tone or a pulse.
Note: Tone is the factory default setting.
Specify the maximum speed in baud at which faxes are sent.
Note: 33600 is the factory default setting.
Adjust the amount of background visible on a scanned image.
Note: 0 is the factory default setting.
Specify which color to drop and to adjust the dropout setting for each color threshold.
Notes:
•
None is the factory default setting for Color Dropout.
• 128 is the factory default setting for each color threshold.
Specify the contrast in the scanned image.
Note: "Best for content" is the factory default setting.
128