Copy Settings Menu - Lexmark MX310dn User Manual

Understanding the printer menus

Copy Settings menu

Use
Content Type
Text
Graphics
Text/Photo
Photo
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Paper Saver
Off
2‑up Portrait
2‑up Landscape
4‑up Portrait
4‑up Landscape
Print Page Borders
On
Off
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
To
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Specify whether an original document is two‑sided (duplex) or one‑sided, and then
specify whether the copy should be two‑sided or one‑sided.
Notes:
•
1 sided to 1 sided—The original document has print on one side and the copy
will also have print on one side.
•
1 sided to 2 sided—The original document has print on one side, while the
copy will have print on both sides.
•
2 sided to 1 sided—The original document has print on both sides, while the
copy will have print on just one side.
•
2 sided to 2 sided—The original document has print on both sides, and the
copy will also have print on both sides.
Copy two or four sheets of a document on one page.
Note: Off is the factory default setting.
Specify whether or not a border is printed.
Note: Off is the factory default setting.
Keep the pages of a print job stacked in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
122