Printing Slows Down - Lexmark MX310dn User Manual

Troubleshooting
Action
Step 3
a
Remove held jobs stored in the printer memory.
b
Resend the print job.
Did the job print?
Step 4
a
Disable the Page Protect feature.
From the printer control panel, navigate to:
Settings > General Settings > Print Recovery > Page Protect > Off
b
Resend the print job.
Did the job print?
Step 5
a
Check if the cable connections to the printer and print server are
secure. For more information, see the setup documentation that came
with the printer.
b
Resend the print job.
Did the job print?

Printing slows down

Notes:
•
When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser.
•
The printer speed may be reduced when printing for long periods of time, or printing at elevated temperatures.
Action
Step 1
a
Make sure the size of the paper loaded in the tray matches the fuser
type.
Note: Use a 110-volt fuser for printing on letter-size paper and a
220-volt fuser for printing on A4‑size paper.
b
Resend the print job.
Does the print speed increase?
Step 2
a
Replace the fuser. For more information on installing the fuser, see
the instruction sheet that came with the part.
b
Resend the print job.
Does the print speed increase?
Yes No
The problem is solved. Go to step 4.
The problem is solved. Go to step 5.
The problem is solved. Contact
support.
Yes No
The problem is solved. Go to step 2.
The problem is solved. Contact
support.
207
customer
customer