Canceling An Outgoing Fax - Lexmark MX310dn User Manual

Faxing
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
Fax > > enter the fax number >
Viewing a fax log
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Reports.
3
Click Fax Job Log or Fax Call Log.
Blocking junk faxes
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Fax Settings > Analog Fax Setup > Block No Name Fax.
Notes:
•
This option blocks all incoming faxes that have a private caller ID or no fax name.
•
In the Banned Fax List field, enter the phone numbers or fax names of specific fax callers you want to block.

Canceling an outgoing fax

Canceling a fax job while the original documents are still scanning
•
If you are using the ADF tray and Scanning page appears, then press
•
If you are using the scanner glass and Scanning page, Scan the Next Page, or Finish the Job
appears, then press
> Darkness > adjust the darkness of the fax >
.
.
90