Lexmark MX310dn User Manual page 130

Understanding the printer menus
Use
Paper Source
Auto
Tray [x]
MP Feeder
Sides (Duplex)
Off
On
Separator Sheets
Off
Before Job
After Job
Separator Sheet Source
Tray [x]
MP Feeder
Fax Footer
On
Off
Max Speed
2400
4800
9600
14400
33600
Fax Forwarding
Print
Print and Forward
Forward
Forward to
Fax
E‑mail
FTP
LDSS
eSF
Forward to Shortcut
Block No Name Fax
Off
On
To
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Enable two‑sided (duplex) printing for incoming fax jobs.
Note: Off is the factory default setting.
Enable the printer to include separator sheets for incoming fax jobs.
Note: Off is the factory default setting.
Specify the paper source for separator sheet.
Note: Tray 1 is the factory default setting.
Print the transmission information at the bottom of each page from a received fax.
Note: Off is the factory default setting.
Specify the maximum speed in baud at which faxes are received.
Note: 33600 is the factory default setting.
Enable forwarding of received faxes to another recipient.
Note: Print is the factory default setting.
Specify the type of recipient to which faxes will be forwarded.
Notes:
•
Fax is the factory default setting.
•
This menu is available only from the printer Embedded Web Server.
Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS,
or eSF).
Note: You can enter up to 16 characters.
Enable blocking of incoming faxes sent from devices with no fax ID specified.
Note: Off is the factory default setting.
130