Motorola MC68340 User Manual page 122

Integrated processor with dma
Hide thumbs Also See for MC68340:
Table of Contents

Advertisement

SWT1, SWT0—Software Watchdog Timing
These bits, along with the SWP bit in the PITR, control the divide ratio used to establish
the timeout period for the software watchdog. The software watchdog timeout period is
given by the following formula:
The software watchdog timeout period, listed in Table 4-7, gives the formula to derive the
software watchdog timeout for any clock frequency. The timeout periods are listed for a
32.768-kHz crystal used with the VCO and for a 16.777-MHz external oscillator.
Table 4-7. Deriving Software Watchdog Timeout
SWP
SWT1
SWT0
0
0
0
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
NOTE: When the SWP and SWT bits are modified to select a software timeout other than the default, the
software service sequence ($55 followed by $AA written to the software service register) must be
performed before the new timeout period takes effect. Refer to 4.2.2.5 Software Watchdog for
more information.
DBFE—Double Bus Fault Monitor Enable
1 = Enable double bus fault monitor function.
0 = Disable double bus fault monitor function.
For more information, see 4.2.2.3 Double Bus Fault Monitor and Section 5 CPU32.
BME—Bus Monitor External Enable
1 = Enable bus monitor function for an internal-to-external bus cycle.
0 = Disable bus monitor function for an internal-to-external bus cycle.
For more information see 4.2.2.2 Internal Bus Monitor.
BMT1, BMT0—Bus Monitor Timing
These bits select the timeout period for the bus monitor (see Table 4-8). Upon reset, the
bus monitor is set to 64 system clocks.
MOTOROLA
Freescale Semiconductor, Inc.
divide count
EXTAL frequency
Software Timeout Period
9
2
/EXTAL Input Frequency
11
2
/EXTAL Input Frequency
13
2
/EXTAL Input Frequency
15
2
/EXTAL Input Frequency
18
2
/EXTAL Input Frequency
20
2
/EXTAL Input Frequency
22
2
/EXTAL Input Frequency
24
2
/EXTAL Input Frequency
MC68340 USER'S MANUAL
For More Information On This Product,
Go to: www.freescale.com
32.768-kHz
16.777-MHz External
Crystal Period
Clock Period
15.6 ms
62.5 ms
250 ms
1 s
8 s
32 s
128 s
512 s
30 s
122 s
488 s
1.95 ms
15.6 ms
62.5 ms
250 ms
1 s
4- 25

Advertisement

Table of Contents
loading

Table of Contents