Sensor (Pass Through) With Cable Removal; Tray Roller Catch Assembly Removal - Dell 5230dn Mono Laser Printer Service Manual

Sensor (pass through) with cable removal

1. Remove the 250-sheet frame assembly. Go to
2. Disconnect the sensor (pass through) cable connector from the 250-sheet controller card.
3. Remove the sensor (pass through) with cable.
Sensor (pass through) with cable removal
1. Remove the 550-sheet frame assembly. Go to
2. Disconnect the sensor (pass through) cable connector from the 550-sheet controller card.
3. Remove the sensor (pass through) with cable.

Tray roller catch assembly removal

1. Remove the media tray catch spring. Go to
"250-sheet frame assembly removal" on page
"550-sheet frame assembly removal" on page
"Media tray catch spring removal" on page
4-105.
4-111.
4-159.
4-197
Repair Information