Sensor (Pass Through) Late Jam Service Check - Dell 5230dn Mono Laser Printer Service Manual

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Sensor (pass through) late jam service check

Use this procedure for the following jams:
• 242.02
• 242.10
• 243.04
• 243.16
• 244.05
• 245.02
• 245.10
Step
1
Check the media size setup and tray guides for all media
trays.
Does the media size, in use, match the size set for all media
trays?
2
Check the media trays for overfilling.
Are any of the media trays overfilled?
3
Check the media condition in all media trays.
Is any of the media in any of the media trays crumpled or
damaged?
4
Check the media tray pass through areas for obstructions.
Are the pass through areas in all the media trays free from
obstructions?
5
Check the two pick roll assemblies in the media tray being
picked from.
Are the above components free of excess wear and
contamination?
6
Check the appropriate media tray sensor (pass through) for
proper operation.
1. Enter the diagnostic mode
2. Select Input tray tests
3. Sensor test
4. Select the appropriate tray number
3. Observe the line item "pass through" for the appropriate
media tray
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
7
Check the above sensor for proper connection.
Is the above sensor connected properly?
• 242.03
• 242.04
• 242.16
• 242.37
• 243.04
• 243.05
• 243.37
• 244.02
• 244.06
• 244.10
• 245.03
• 245.04
• 245.13
• 245.16
Check
• 242.05
• 242.06
• 243.02
• 243.03
• 243.06
• 243.10
• 244.03
• 244.04
• 244.16
• 244.37
• 245.05
• 245.06
• 245.37
Yes
Go to step 2.
Replace the
media, or change
the media size
setup.
Remove any
Go to step 3
excess new
media.
Replace the
Go to step 4.
damaged media
with new.
Go to step 5.
Remove
obstructions.
Go to step 6.
Clean or replace
the pick roll
assembly.
Go to
assembly
removal" on
page 4-57
Go to step 7.
Go to step 6.
Replace the
Replace the
appropriate
connection.
Sensor (pass
through).
"250-sheet
Go to
controller card
assembly
removal" on
page
4-107.
Diagnostic information
No
"Pick roll
2-139

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents