Dell 5230dn Mono Laser Printer Service Manual page 99

Error
code or Error contents
message
260.01 Envelope feeder
assembly error
260.02 Envelope feeder
assembly error
260.05 Sensor (envelope
feeder pass through)
lingering jam
Source = Envelope
feeder
Description/Action
Mechanical feed error or timing
error.
Mechanical feed error or timing
error.
The media reached the sensor
(envelope feeder pass through)
but did not clear it in the
specified time.
Possible repair actions
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check media for proper
installation.
4. Check for obstructions in
media path.
5. Ensure the envelope feeder
assembly is properly
installed.
6. Check all connections on
the envelope feeder
assembly.
7. Replace the envelope
feeder assembly if problem
remains.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check media for proper
installation.
4. Check for obstructions in
media path.
5. Ensure the envelope feeder
assembly is properly
installed.
6. Check all connections on
the envelope feeder
assembly.
7. Replace the envelope
feeder assembly if problem
remains.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check for obstructions in
media path.
4. Ensure the envelope feeder
assembly is properly
installed.
5. Check all connections on
the envelope feeder
assembly.
6. Replace the envelope
feeder assembly if problem
remains.
Diagnostic information
2-65