Spots - Dell 5230dn Mono Laser Printer Service Manual

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Spots

Leading edge
Trailing edge
Step
1
Check the media condition.
Load new, dry, recommended media.
Re-print the defective image.
Does the error continue?
2
Check the media transfer route.
Is the media route free of contamination or debris?
3
Check the print cartridge for spots or other damage on
the drum surfaces.
Is the print cartridges free of excess wear and
contamination?
4
Check the charge roll assembly for contamination and
wear.
Is the above component free of excess wear and
contamination?
5
Check the transfer roll assembly for contamination and
wear.
Is the above component free of excess wear and
contamination?
6
Check the heat roll and pressure roll.
Remove the fuser unit assembly.
Is there contamination or cracks on the heat roll and/or
pressure roll?
2-162
Service Manual
Check
CAUTION: Allow the fuser unit assembly
to cool down.
Yes
Go to step 2.
Problem solved.
Go to step 3.
Remove debris
or
contamination.
Go to step 4.
Replace the
print cartridge.
Go to step 5.
Replace the
charge roll
assembly.
Go to
door removal"
on page
Go to step 6.
Replace the
transfer roll
assembly.
Go to
roll assembly
removal" on
page
Replace the
Go to step 7
fuser unit
assembly.
Go to
"Fuser
unit assembly
removal" on
page
4-22.
No
"Access
4-7.
"Transfer
4-80.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents