Dell 5230dn Mono Laser Printer Service Manual page 53

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Error
code or
Error contents
message
201.02
Sensor (fuser output)
late jam.
Type 1 fuser
201.03
Image data did not
start in time
Type 1 fuser
201.04
Sensor (narrow
media) late jam
Type 1 fuser
201.06
Sensor (narrow
media) late jam
Type 1 fuser
201.07
Sensor (fuser output)
late jam
Type 1 fuser
201.25
Sensor (fuser output)
area jam.
Type 2 fuser
201.26
Main drive motor
assembly load error.
Type 2 fuser
Description/Action
The media is late reaching the
sensor (fuser output) within the
specified time.
Printhead write failure
The expected wide media is
late reaching the sensor
(narrow media) within the
specified time.
The expected wide media is
late reaching the sensor
(narrow media) within the
specified time.
The media is late reaching the
sensor (fuser output) within the
specified time.
The media is jammed in the
sensor (fuser output) area.
The main drive motor assembly
has failed or caused high
mechanical load due to paper
jam or bind.
Possible repair actions
Go to sensor (fuser output) late
jam service check.
"Sensor (fuser output)
See
late jam service check." on
page
2-129.
If problem remains, a type 2
fuser can be installed.
1. Check all connections on the
printhead assembly
2. Check all connections on the
system card assembly.
3. Replace the printhead
assembly if problem remains.
4. Replace the system card
assembly if problem remains.
Go to
"System card
assembly removal" on
page
4-76.
Go to sensor (narrow media)
late jam service check.
"Sensor (narrow media)
See
late jam service check." on
page
2-133.
Go to sensor (narrow media)
late jam service check.
See
"Sensor (narrow media)
late jam service check." on
page
2-133.
Go to sensor (fuser output) late
jam service check.
"Sensor (fuser output)
See
late jam service check." on
page
2-129.
Go to sensor (fuser output)
service check.
See
"Sensor (fuser output)
late jam service check." on
page
2-129.
1. Check all connections on
the main drive motor
assembly.
2. Check all connections on
the system card assembly.
3. Replace the main drive
motor assembly if problem
remains. Go to
"Output
cover assembly removal"
on page
4-54.
Diagnostic information
2-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents