Registration; Sensor (Input); Aligner Assembly - Dell 5230dn Mono Laser Printer Service Manual

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Paper size
Other Envelope
1
This size appears in the Paper Size menu only when the paper source does not support size sensing or
when size sensing is turned off.
2
Only the standard exit bin supports this size.
3
This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the
software application.
4
To support duplexing, the Universal width must be between 148 mm (5.8 in) and 216 mm (8.5 in);
Universal length must be between 182 mm (7.2 in) and 356 mm (14 in).

Registration

Aligner
assembly

Sensor (input)

Sensor (input)
The sensor (input) is located just before the print cartridge and can detect whether media exists in the input
path.

Aligner assembly

The aligner assembly is used to feed the media through the input path and to ensure that media is fed through
the machine in a perfectly straight manner and not in a skewed manner. The aligner assembly can be adjusted
to correct media skew issues and should always be adjusted when it is replaced.
250-or 550-sheet
Dimensions
trays (standard
or optional
98 x 162 mm
(3.9 x 6.4 in.) to
176 x 250 mm
(6.9 x 9.8 in.)
Optional
Multipurpose
2000-sheet
feeder
tray
x
Duplex unit
3-67
Diagnostic aids

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents