High capacity input tray (HCIT) cover, left removal
Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
Note: Before removing the HCIT cover, left, first remove the left side anti-tip latch assembly. Go to
"High
capacity input tray (HCIT) anti-tip latch assembly removal" on page
4-124.
1. Remove the HCIT cover, rear. Go to
"High capacity input tray (HCIT) cover, rear removal" on
page
4-119.
2. Remove the four screws (A) securing the HCIT cover, left to the drawer.
4-123
Repair Information