Sensor (Fuser Output) Lingering Jam Service Check - Dell 5230dn Mono Laser Printer Service Manual

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Sensor (fuser output) lingering jam service check.

Use this procedure for the following jams:
• 202.01
• 202.12
• 202.35
• 202.57
• 202.76
• 202.86
Step
1
Check the media size setup and tray guides for all media
trays.
Does the media size, in use, match the size set for all media
trays?
2
Check all the media trays for proper media installation.
Is the media properly installed in all the media trays?
3
Check the door assembly, rear.
Is the above component properly closed?
4
Check the fuser unit assembly for damage and life
expiration.
Is the above component damaged or has it exceeded life?
5
Check the sensor (fuser output) for proper operation.
1. Enter the diagnostic mode
2. Select Base sensor tests
3. Observe the line item "output"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
6
Check the above sensor for proper connection.
Is the above sensor connected properly?
7
Check the redrive assembly for damage.
Is the above component free from damage?
8
Perform a print test and check the redrive motor assembly
for proper operation.
Does the above component operate properly?
• 202.02
• 202.07
• 202.26
• 202.27
• 202.36
• 202.37
• 202.59
• 202.60
• 202.77
• 202.82
• 202.87
Check
• 202.10
• 202.11
• 202.32
• 202.34
• 202.51
• 202.52
• 202.61
• 202.62
• 202.84
• 202.85
Yes
Go to step 2.
Replace the
media, or change
the media size
setup.
Go to step 3.
Remove and
properly re-install
the media.
Go to step 4.
Open then
properly close the
door assembly,
rear.
Replace the fuser
Go to step 5.
unit assembly.
"Fuser unit
Go to
assembly
removal" on
page
4-22.
Go to step 7.
Go to step 6.
Replace the fuser
Replace the
unit assembly.
connection.
Go to
"Fuser unit
assembly
removal" on
page
4-22.
Go to step 8.
Replace the
redrive assembly.
Go to
removals" on
page
Go to step 9.
Replace the
redrive motor
assembly.
Go to
assembly
removal" on
page
Diagnostic information
No
"Option
4-85.
"Redrive
4-63.
2-131

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents