Print Quality Pages
The print quality test pages can be printed from either the Diagnostics Menu or Configuration Menu (CONFIG
MENU). When printed from the Diagnostics Menu, additional information is included, and the print cartridge
lockout is bypassed. See
information may be included on the print quality pages which is not included on the print menu page.
To print the Print Quality Test Pages, touch
message Printing Quality Test Pages is displayed.
The following is printed on the first page:
Device Information to include page count, installed memory, processor speed, serial number, engine ID,
system card ID, and printer revision levels
Printer Margin Settings
Minimum Stroke Width
The print quality pages consist of four pages. Page one contains a mixture of graphics and text. Page two is
gray with two one-inch black squares located on the bottom right. Page three is solid black page and page four
is blank. If duplex is turned on, the pages are duplexed. The Print Quality Test pages are printed in English and
must always be printed on letter, legal, or A4 paper.
Menu Settings Page
To print the Menu Settings Page, touch
Printing Menu Settings Page is displayed.
The following settings are printed:
Maintenance Counter Value
Min Copy Memory
Key Repeat Rate
Touch Back to return to the Configuration Menu.
The event log provides a history of printer errors. The event log can only be printed in CONFIG MENU.
Additional options are available in DIAGNOSTICS. See
To print the event log:
"Print quality pages (Prt Quality Pgs)" on page
USB Scan to Local
NumPad Job Assist
to select Event Log from Configuration Menu.
to print the log. Printing EVENT LOG.. displays on the touchscreen.
to select Print Quality Pages from Configuration Menu. The
to select Menu Settings Page from Reports. The message
"EVENT LOG" on page
3-26. Additional configuration
Print Quality Pages
Fax Storage Location
ADF Edge Erase
Key Repeat Initial Delay
Clear Custom Status