8. Disconnect the connector (D) from the assembly.
C
D
Operator panel hinge assembly, left removal (5230n/dn, 5350dn, and 5530dn)
1. Remove the operator panel door assembly. Go to
"Operator panel door assembly removal (5230n/dn,
5350dn, and 5530dn)" on page
4-43.
2. Remove the screw (A) securing the cover to the operator panel hinge assembly, left.
3. Remove the cover.
4. Detach the switch (B) from the operator panel hinge assembly, left.
5. Remove the harnesses (C) from the operator panel hinge assembly, left.
C
A
B
6. Detach the spring (D) from the operator panel hinge assembly, left.
7. Detach the spring (E) from the operator panel hinge assembly, left.
8. Remove the E-clip (F) from the operator panel hinge assembly, left.
4-45
Repair Information