Dell 5230dn Mono Laser Printer Service Manual page 139

Error
code or Error contents
message
936.21 Main drive motor
assembly failure
Failed to stop within
timeout.
Motor = type 1
936.30 Main drive motor
assembly failure
No lock detected at
motor start for motor
ID.
Motor = type 0
936.31 Main drive motor
assembly failure
No lock detected at
motor start for motor
ID.
Motor = type 1
936.60 Main drive motor
assembly failure
No lock detected at
normal motor start.
Motor = type 0
Description/Action
The main drive motor assembly
may be faulty or has failed.
The main drive motor assembly
may be faulty or has failed.
The main drive motor assembly
may be faulty or has failed.
The main drive motor assembly
may be faulty or has failed.
Possible repair actions
1. Check all connections on
the system card assembly.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly. Go to
"Output cover assembly
removal" on page 4-54.
4. Replace the system card
assembly if problem
remains. Go to "System
card assembly removal"
on page 4-76.
1. Check all connections on
the system card assembly.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly. Go to
"Output cover assembly
removal" on page 4-54.
4. Replace the system card
assembly if problem
remains. Go to "System
card assembly removal"
on page 4-76.
1. Check all connections on
the system card assembly.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly. Go to
"Output cover assembly
removal" on page 4-54.
4. Replace the system card
assembly if problem
"System
remains. Go to
card assembly removal"
on page 4-76.
1. Check all connections on
the system card assembly.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly. Go to
"Output cover assembly
removal" on page 4-54.
4. Replace the system card
assembly if problem
"System
remains. Go to
card assembly removal"
on page 4-76.
2-105
Diagnostic information