Dell 5230dn Mono Laser Printer Service Manual page 113

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Error
code or
Error contents
message
28x.68
Staple ready home
position jam
x = bin
number
Applies to:
StapleSmart finisher
28x.69
Staple ready home
position jam
x = bin
number
Applies to:
StapleSmart finisher
Description/Action
The sensor (self priming) within
the stapler assembly does not
detect a ready staple prior to a
staple job.
Staples empty
The sensor (self priming) within
the stapler assembly does not
detect a ready staple in the
specified time after the staple
job was sent.
Staples not empty
Possible repair actions
1. Check all the connections on
the controller card and the
stapler assembly.
2. Remove the staple cartridge
and remove all jammed
staples. If the cartridge is
jammed and can not be
removed, go to step 3.
3. Remove the stapler
assembly.
Go to
"SFP stapler assembly
stapler unit assembly
removal" on page
4-183.
4. Manually rotate the drive
gears and reset the stapler.
Remove all jammed staples
then reinstall the stapler
assembly.
5. If problem remains, replace
the stapler assembly.
Go to
"SFP stapler assembly
stapler unit assembly
removal" on page
4-183.
1. Check all the connections on
the controller card and the
stapler assembly.
2. Remove the staple cartridge
and remove all jammed
staples. If the cartridge is
jammed and can not be
removed, go to step 3.
3. Remove the stapler
assembly.
Go to
"SFP stapler assembly
stapler unit assembly
removal" on page
4-183.
4. Manually rotate the drive
gears and reset the stapler.
Remove all jammed staples
then reinstall the stapler
assembly.
5. If problem remains, replace
the stapler assembly.
Go to
"SFP stapler assembly
stapler unit assembly
removal" on page
4-183.
Diagnostic information
2-79

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents