Media Level Sensing; Pick Arm Assembly - Dell 5230dn Mono Laser Printer Service Manual

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Media level sensing

The media level for the media tray assembly is triggered by the actuator flag positioned in the two
photointerrupter sensors in the pick arm bracket assembly. The actuator flag blocks and unblocks the two
sensors in different sequence; it determines whether the paper tray is empty, low, or full.
Note: Media level sensing through sensor blocking sequence

Pick arm assembly

Media out actuator
Sensor (media low)
Pick roll assemblies
Since all media trays are functionally equivalent in terms of the switch (media size), sensor (media empty),
sensor (media low), only the components of one tray are described here.
The pick arm assembly is a mechanical unit supplying media from the media tray assembly to the printer. The
driving force, from the pick arm drive motor on the pick arm assembly, is transmitted to the two pick rolls to feed
media.
When the pick rolls pick up media, the remaining media decreases, and the media out actuator will lower and
interact with the sensor (media low) and sensor (media empty) to determine the amount of media remaining.
3-86
Service Manual
250-sheet tray
Sensor A
Tray full
unblocked
Tray low
blocked
Tray empty
blocked
550-sheet tray
Sensor A
Tray full
unblocked
Tray low
blocked
Tray empty
blocked
Sensor B
unblocked
unblocked
blocked
Sensor B
blocked
blocked
unblocked
Sensor (media empty)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents