Printhead Assembly Removal (5230N/Dn) - Dell 5230dn Mono Laser Printer Service Manual

Printhead assembly removal (5230n/dn)

Note: When replacing the printhead assembly, ensure that the printhead is properly calibrated, or print quality
issues will occur. Go to
1. Remove the laser cover. Go to
2. Remove the six screws (A) securing the metal cover to the machine.
A
3. Remove the metal cover.
4. Disconnect the connections (B) from the printhead assembly.
4-60
Service Manual
"Alignment assembly adjustment" on page
"Laser cover removal" on page
A
4-4.
4-26.
B