Fuser to LVPS AC cable removal
CAUTION: Unplug the printer before you begin.
Remove the fuser wick assembly cover. See
Remove the redrive assembly. See
Remove the right side cover. See
Disconnect the fuser to LVPS AC cable (A) from the fuser lamp connector on the fuser, and remove the
cable through the cable retainer (B) and the lower rectangular opening (C) in the fuser frame.
Remove the pass thru plate. See
Disconnect the LVPS to system board DC cable (D) from the LVPS.
"Fuser wiper cover assembly removal" on page
"Redrive assembly removal" on page
"Right cover removal" on page
"Pass thru plate" on page