Dell 5230dn Mono Laser Printer Service Manual page 74

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Error
code or
message
239.07
239.08
239.11
241.00
2-40
Service Manual
Error contents
Select output device
error.
Source = External
duplex
Input source ready
error.
Source = External
duplex
Sensor (input) late
jam from duplex
Source = External
duplex
Media tray 1 area jam
Source = Tray 1
Description/Action
Mechanical feed error or timing
error.
Mechanical feed error or timing
error.
Media is late reaching the
sensor (input) within the
specified time during the
second side printing using the
external duplex.
The media is jammed in the
media tray 1 area.
Possible repair actions
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
4. Ensure the external duplex
assembly is properly
installed.
5. Ensure the rear door of the
external duplex is fully
closed.
6. Check all connections on
the external duplex
assembly.
7. Replace the external
duplex assembly if problem
remains.
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
4. Ensure the external duplex
assembly is properly
installed.
5. Ensure the rear door of the
external duplex is fully
closed.
6. Check all connections on
the external duplex
assembly.
7. Replace the external
duplex assembly if problem
remains.
Go to sensor (input) late jam
service check.
See
"Sensor (input) late jam
service check." on
page
2-123.
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents