Dell 5230dn Mono Laser Printer Service Manual page 132

Error
code or
message
924.50
924.51
924.75
924.76
925.00
925.01
2-98
Service Manual
Error contents
Open fuser thermistor
check
Fuser type = 1
Fuser page count has
exceeded life.
Open fuser thermistor
check failure.
Fuser type = 1
Fuser page count has
exceeded life.
Open fuser thermistor
check
Fuser type = 2
Fuser page count has
exceeded life.
Open fuser thermistor
check failure.
Fuser type = 2
Fuser page count has
exceeded life.
Incorrect fuser or
fuser lamp detected.
Fuser type = 1
Incorrect fuser or
fuser lamp detected.
Fuser type = 1
Description/Action
The fuser thermistor might be
faulty.
The fuser thermistor has failed.
The fuser thermistor might be
faulty.
The fuser thermistor has failed.
The machine detected a 115 V
lamp in a 220 V machine. The
fuser lamp has an excessive
wattage rating.
The machine detected a 115 V
lamp in a 220 V machine. The
fuser lamp has an excessive
wattage rating.
Possible repair actions
Replace the fuser unit
assembly if problem remains.
Go to "Fuser unit assembly
removal" on page 4-22.
Replace the fuser unit
assembly if problem remains.
Go to "Fuser unit assembly
removal" on page 4-22.
Replace the fuser unit
assembly if problem remains.
Go to "Fuser unit assembly
removal" on page 4-22.
Replace the fuser unit
assembly if problem remains.
Go to "Fuser unit assembly
removal" on page 4-22.
1. Turn the machine off/on
and ensure the fuser unit
assembly is properly
installed.
2. Ensure the proper voltage
fuser is installed in the
machine.
3. Replace the fuser unit
assembly if problem
remains. Go to "Fuser unit
assembly removal" on
page 4-22.
1. Turn the machine off/on
and ensure the fuser unit
assembly is properly
installed.
2. Ensure the proper voltage
fuser is installed in the
machine.
3. Replace the fuser unit
assembly if problem
remains. Go to "Fuser unit
assembly removal" on
page 4-22.