SFP stapler assembly sensor (bin full receive) removal
1. Remove the right cover. Go to
2. Remove the two screws (A) securing the sensor (bin full receive).
3. Disconnect the harness and remove.
SFP stapler assembly sensor (media in stapler) removal
1. Remove the stapler unit assembly from the. Go to
removal" on page
2. Using a flat-blade screwdriver, release the tabs (A) securing the sensor.
4-190
Service Manual
"SFP stapler assembly right cover removal" on page
4-183.
"SFP stapler assembly stapler unit assembly
A
4-173.
A