Dell 5230dn Mono Laser Printer Service Manual page 583

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Print defects guide
Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best
matches the defects on the print job indicates which particular part may be causing the defect.
For example, the distance between these two marks represents
a repeating defect that occurs every 28.3 mm (1.11 in.), which
means the charge rollers may need to be replaced.
Replace the
transfer roller
(2.04 in.)
Replace the
charge rollers
28.3 mm
(1.11 in.)
Note: If the defect appears on the printed side of a single-sided print
job, replace the toner cartridge before replacing the fuser.
Replace the toner cartridge
47.8 mm
(1.88 in.)
51.7 mm
Print defects guide
Page 1 of 1
96.8 mm
88.0 mm
(3.81 in.)
(3.46 in.)
Replace the fuser
95.2 mm
(3.75 in.)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents