Dell 5230dn Mono Laser Printer Service Manual page 84

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Error
code or
message
243.17
243.18
243.19
243.33
243.34
243.35
243.36
243.37
243.39
243.40
2-50
Service Manual
Error contents
Media tray pulled jam
Source = Tray 3
Pick retry timeout
Source = Tray 3
Pick retry timeout
Source = Tray 3
Tray 3 not ready
Source = Tray 3
Empty tray pick
attempted
Source = Tray 3
Pick page received
while POR not yet
done.
Source = Tray 3
Sensor (pass through)
static jam
Source = Tray 3
Sensor (pass through)
late jam
Source = Tray 3
Media tray pulled jam
Source = Tray 3
Sensor (pass through)
lingering jam
Source = Tray 3
Description/Action
A media tray above the source
tray was pulled during the
printing process.
The engine timed out waiting
for the tray 3 to report ready
before the first pick attempt.
The engine timed out waiting
for the tray 3 to report ready
before a pick retry attempt.
Tray was not properly pushed
into the machine.
The pick arm attempted to pick
with no media in the tray.
Media remains on the sensor
(input) during the warm up
sequence.
Media remains on the sensor
(input) during the warm up
sequence.
The media is late reaching the
sensor (pass through) within
the specified time.
A media tray above the source
tray was pulled during the
printing process.
Media reached the sensor
(pass through) within the
specified time but did not clear
it within the specified time.
Possible repair actions
1. Remove all media present
in media path.
2. Close all media trays.
Turn the machine off/on.
Turn the machine off/on.
1. Check the size sensing
fingers on the media tray
for damage
2. Replace the media tray
assembly if problem
remains.
3. Check the switch (media
size) for proper connection.
4. Replace the switch (media
size) if problem remains.
Go to
"Switch (media
size) assembly removal"
on page
4-74.
1. Check the media out
actuator for damage.
2. Replace the media out
actuator if problem
"Tray roller
remains. Go to
catch assembly removal"
on page
4-83.
Go to sensor (pass through)
static jam service check.
See
"Sensor (pass through)
static jam service check" on
page
2-141.
Go to sensor (pass through)
static jam service check.
"Sensor (pass through)
See
static jam service check" on
page
2-141.
Go to sensor (pass through)
late jam service check.
See
"Sensor (pass through)
late jam service check" on
page
2-139.
1. Remove all media present
in media path.
2. Close all media trays.
Go to sensor (pass through)
lingering jam service check.
See
"Sensor (pass through)
lingering jam service check."
on page
2-140.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents