Dell 5230dn Mono Laser Printer Service Manual page 103

Service manual
Hide thumbs Also See for 5230dn Mono Laser Printer:
Table of Contents

Advertisement

Error
code or
Error contents
message
27x.51
Right tamper does not
leave home position
x = bin
failure
number
Applies to:
Offset stacker
271.52
Sensor (mailbox
empty) lingering jam
x = bin
number
Applies to:
Mailbox
27x.53
Sensor (mailbox
empty) late jam
x = bin
number
Applies to:
Mailbox
27x.54
Sensor (output pass
through) lingering jam
x = bin
number
Applies to:
Mailbox
27x.55
Sensor (mailbox
empty) lingering jam
x = bin
number
Applies to:
Mailbox
27x.58
Sensor (output pass
through) late jam
x = bin
number
Applies to:
Mailbox
High capacity stacker
Offset stacker
Output expander
28x.25
Invalid ejector motor
manager status.
x = bin
number
Applies to:
StapleSmart finisher
Description/Action
The sensor (right tamper HP)
does not detect that the tamper
has moved from home position.
The media reached the sensor
(mailbox empty) but did not
clear it in the specified time.
The media is late reaching the
sensor (mailbox empty) within
the specified time.
The media reached the sensor
(output pass through) but did
not clear it in the specified time.
The media reached the sensor
(mailbox empty) but did not
clear it in the specified time.
The media is late reaching the
sensor (output pass through)
within the specified time.
A software failure has occurred
with the output option.
Possible repair actions
1. Check all the connections on
the output option controller
card.
2. Check the tamper drive belt
for damage and replace if
needed.
3. Replace the right tamper
motor assembly.
Go to
"SFP stapler assembly
tamper drive motor
assembly removal" on
page
4-181.
4. Replace the sensor (tamper
HP).
Go to
"SFP stapler assembly
sensor (tamper HP left and
right) removal" on
page
4-188.
4. Replace the output option if
problem remains.
See
"Sensor (mailbox empty)
lingering jam service check"
on page
2-147.
See
"Sensor (mailbox empty)
late jam service check" on
page 2-146
See
"Sensor (output pass
through) lingering jam
service check" on
page
2-144.
See
"Sensor (mailbox empty)
lingering jam service check"
on page
2-147.
"Sensor (output pass
See
through) late jam service
check" on page
2-143.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
Diagnostic information
2-69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5230n5530dn5350dn

Table of Contents